Maytag MHW4300D Benutzeranleitung

22

First try the solutions suggested here or visit our website at www.maytag.com/product_help –

In Canada www.maytag.ca for assistance and to possibly avoid a service call. 

If you experience

Possible Causes

Solution

Washer not performing as expected (cont.)

Incorrect dispenser 

operation

Clogged dispensers or laundry  

products dispensing too soon.

Do not overfill dispenser. Overfilling causes immediate 

dispensing.
Load dispensers before starting a cycle.
Homes with low water pressure may result in residual powder  

in the dispenser. To avoid, select a warmer wash temperature  

if possible, depending on your load.

Liquid chlorine bleach not used in bleach 

compartment.

Use only liquid chlorine bleach in the bleach compartment.

Water in dispenser after cycle has 

finished.

It is normal for small amounts of water to remain in dispenser at 

the end of the cycle.

Single-dose laundry packet 

not dissolving

Adding laundry packet incorrectly.

Be sure laundry packet is added to washer drum before 

adding clothes. Do not add packet to dispenser. Follow the 

manufacturer’s instructions to avoid damage to your garments.

Cycle time changes or cycle 

time too long

Normal washer operation.

The cycle times vary automatically based on your water pressure, 

water temperature, detergent, and clothes load. The options you 

select will also affect the cycle times.  

Excessive suds in washer.

When excessive suds are detected, a special suds routine  

automatically starts to remove extra suds and ensure proper 

rinsing of your garments. This routine will add time to the original 

cycle. 

Load may be out of balance.

When load unbalance occurs, a washing process will start to  

redistribute the load. This may lengthen the cycle time. Avoid 

washing single items. Balance a single item such as a rug or 

jeans jacket with a few extra items.

Not using correct cycle for load type.

The Rapid Wash cycle is designed for smaller load sizes  

(2–4 items) of lightly soiled garments. If larger loads are  

washed in this cycle, cycle time will be increased.
When using the Rapid Wash or Delicates cycles, you should 

wash small loads. This ensures a gentle wash for your garments 

without increasing cycle times. 

The controls are not  

responding

Control Lock is on.

Touch and hold CONTROL LOCK for 3 seconds to turn off 

Control Lock. For each second CONTROL LOCK is held down, 

the display will count down one second: you will see “3,” then 

“2,” then “1.”