Vigo Industries VG15280 Spezifikationenblatt

Please carefully read complete instructions before beginning installation.  Only a professional stone

fabricator is qualified to perform this installation.

Note: These instructions are for installation with solid surface, composite material countertops. Vigo
recommends professional countertop installers and is not responsible for damage to the countertop or

sink during installation.

      Do not cut the sink opening with traditional saw cut method.

1.  Unpack the new sink and check the contents of the materials supplied:  Sink,  Mounting brackets,

    and Cutout template (depending on model).  Contact your retailer if any product is damaged or
    missing prior to installation.  Never install a damaged sink as it can void your warranty.

2.  Supplied cutout template provides two options of installation:

A. Flush mount: Sink edge is flush with countertop opening. (FIGURE 1)

B. Reveal mount: Sink rim is exposed approximately 1/4" from the edge of countertop opening.

               (FIGURE 2)

3.  Cut out the appropriate template for your sink model and desired installation option. Place template

     in desired position on countertop, locating center of the bowl over cabinet and faucet holes.

4.  Trace the outline of the template and cut countertop along the inside of the line using appropriate
     cutting tools. Template is for guide only. Use physical sink to ensure accurate cutout opening.

3

5.  Locate the drill holes on the underside of the countertop,

     approximately 1" from edge of the sink to be installed.
    Holes should be evenly spaced approximately 6" to 8"
    apart starting from every corner as shown in Figure 3. It is
    recommended to install a faucet at this point before
    installing the sink.

!