Dacor DTO130 Installationsanweisungen

Installation Specifications

Installation Planning

Observe all governing codes and ordinances during plan-

ning and installation. Contact your local building depart-

ment for further information.

•  Locate the junction box so that the oven may be easily 

disconnected in the event that it needs to be removed 

from the wall completely for service.

•  If the oven is not installed level it may deliver poor or 

inconsistent baking results.

•  Carefully check the location where the oven is to be 

installed. The oven should be placed for convenient 

access. Make certain that electrical power, meeting the 

specifications on page 4, can be provided in the 

selected location.

•  Dacor recommends installing the junction box in the 

one of the locations shown on the facing page.

Minimum interior cabinet depth: 24” (61.0 cm)

•  Install the junction box in a location that allows the 

oven to be removed from the cutout for service without 

being disconnected.

•  Plan the installation so that all minimum clearances 

are met or exceeded. Dimensions shown provide mini-

mum clearances, unless otherwise noted. Be certain 

that proper clearance is provided for the oven door 

when it is in the open position according the Product 

Dimensions.

•  Cabinet cutout dimensions must be used as indicated. 

The specified minimum cabinet depth and width must 

be provided. The cabinet depth and width must com-

pletely enclose the recessed portion of the oven.

•  All contact surfaces between the appliance and the 

cabinet must be solid and level. 

•  Provide a platform within the cabinet to support the 

oven. It must be installed level and straight. The top 

edge of the platform must be flush with the cutout at 

the front of the cabinet. There are no provisions to level 

the oven after it has been installed. 3/4” (1.9 cm) thick 

plywood is recommended.

DTO(V)127

27” (68.6 cm)

25 1/2” (64.8 cm)

minimum (recommended)

26 1/8” (66.4 cm)

maximum

26 3/4” (67.9 cm)

minimum (recommended)

27 1/2” (69.9 cm)

maximum

DTO(V)130

30” (76.2 cm)

28 1/2” (72.4 cm)

minimum (recommended)

29 1/8” (74.0 cm)

maximum

26 3/4” (67.9 cm)

minimum (recommended)

27 1/2” (69.9 cm)

maximum

DTO(V)227

27” (68.6 cm)

25 1/2” (64.8 cm)

minimum (recommended)

26 1/8” (66.4 cm)

maximum

49 1/8” (124.8 cm)  

minimum (recommended)

50” (127.0 cm)

maximum

DTO(V)230

30” (76.2 cm)

28 1/2” (72.4 cm)

minimum (recommended)

29 1/8” (74.0 cm)

maximum

49 1/8” (124.8 cm)  

minimum (recommended)

50” (127.0 cm)

maximum

Cabinet Dimensions

Cabinet tolerances: +1/16 (1.6 mm), -0, unless otherwise stated.