Maytag MGD5100 Installationsanweisungen

Using a TORX T25

®

 screwdriver, remove the 2 screws 

securing the door strike to the door frame of the dryer. Rotate 

the strike 180° and attach to the opposite side of dryer door 

frame, as shown.

Position the door with the inside of the door facing up.  

Using a Phillips screwdriver, remove the 10 screws securing 

the inner door to the outer door. Lift off the inner door and  

set aside. 

Using a Phillips screwdriver, remove the 2 screws from the 

outer window retainer and rotate the outer window assembly 

clockwise until the square notches line up with the 4 tabs  

on the trim ring indicated with arrows in the figure A above. 

Then lift out the outer window and retainer up and off the trim 

ring and set aside (B).

Fig. A

Fig. B