Maytag MGD5100DC Benutzung Und Pflege

Seite von 40
9
CYCLE GUIDE — TIMED CYCLES
Settings and options shown in bold are default settings for that cycle.
If settings are changed, the new settings will be remembered (except on Rapid Dry). If there is a power failure, settings will return to the 
default. 
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
CYCLE GUIDE — STEAM CYCLE (on some models)
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Load Size Recommendations
For best results, follow the load size recommendations noted  
for each cycle. 
Small load: Fill the dryer drum with 3–4 items, not more than 
1/4 full. 
Medium load: Fill the dryer drum up to about 1/2 full. 
Large load: Fill the dryer drum up to about 3/4 full.  
Do not overload. Items need to tumble freely.
Adjusting drying time on Timed Cycles
When you select a Timed  
Cycle, the time appears in  
the display. Use + and – to 
increase or decrease the time  
in 1-minute increments. Touch 
and hold to change the time  
in 5-minute increments. 
The maximum dry time is 100 minutes.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items such 
as towels and work clothes.
A Low to Medium heat setting may be used for drying  
medium-weight items such as sheets, blouses, dresses,  
underwear, permanent press fabrics, and some knits.
Use a no heat (air only) setting for foam, rubber, plastic,  
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various 
loads, refer to the care label directions.
  On steam models, you may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying 
Temperature settings.
  On steam models, you may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying 
Temperature settings.
*  On steam models only.
 
Items to dry:
 
Cycle:
Drying  
Temperature:
Default 
Time:
Available 
Options:
 
Cycle Details:
Any load  
NOTE: Select Air 
Only to dry foam, 
rubber, plastic, 
or heat-sensitive 
fabrics.
Timed Dry
High 
Medium 
Low 
Extra Low 
Air Only
40
Wrinkle Prevent
             Use to dry items to a damp level for items that do 
not require an entire drying cycle. Select a drying 
temperature based on the type of fabrics in your 
load. If you are unsure of the temperature to select 
for a load, select the lower setting rather than the 
higher setting.
Small loads and 
sportswear
Rapid Dry
High 
Medium 
Low 
Extra Low 
Air Only
26
Wrinkle Prevent
             For small loads of 3–4 items.
Small loads and 
sportswear
Air Dry
50
Wrinkle Prevent
             For small loads of 3–4 items. 
Items  
to refresh:
 
Cycle:
Drying  
Temperature:
Default 
Time:
Available 
Options:
 
Cycle Details:
Shirts, blouses, 
and slacks
Refresh
Medium
22
Wrinkle Prevent
† 
Reduce Static*
             Use to reduce light wrinkles from loads left in the 
dryer too long. Do not add dryer sheets.