Maytag MED3100DW Installationsanweisungen

Position the door with the inside of the door facing up. 

Reinstall the 10 screws securing the inner door to the  

outer door. 

Using a TORX T25

®

 screwdriver, remove the 4 screws on the 

dryer. Insert the tabs on the hinge into the mounting slot and 

slide down to engage the top tab. Secure in place with  

the 4 TORX T25

®

 screws removed earlier.

Bottom 

of door

IMPORTANT: If the protective film has not yet been removed 

from the dryer, peel the film from the dryer door before 

proceeding.

Using a TORX T25

®

 screwdriver, remove the 4 screws 

securing the door hinge to the dryer and lift up and out to 

remove the door. Place the door on a soft towel or other  

non-scratch surface. Reinstall the 4 screws in the holes. 

Using a TORX T25

®

 screwdriver, remove the 2 screws 

securing the door strike to the door frame of the dryer. Rotate 

the strike 180° and attach to the opposite side of dryer door 

frame, as shown.