Amana AGR4230BA Benutzung Und Pflege

Seite von 16
11
Oven Door
For normal range use, it is not suggested to remove the oven 
door. However, if removal is necessary, make sure the oven is off 
and cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1. Open the oven door. Insert the hinge locks into both hinge 
hangers. See the following illustration. Do not unlock hinges 
while the door is removed from the range.
 
2. Grasp the door on the sides with your fingers on the front of 
the door and your thumbs on the inside surface.
3. Pull door straight up, then toward you. Do not unlock the 
hinges until the door is replaced on the range.
To Replace:
1. Grasp the door on the sides with your fingers on the front of 
the door and your thumbs on the inside surface.
2. Hold oven door so that the top edge of each door slot is 
horizontal. Insert door hinge into the hinge slots.
3. Tilt top of door toward range. Insert bottom door hinge notch 
down onto front frame edge.
4. Open the door completely and unlock the hinges.
 
5. Close the door slowly to assure door side panel clearance 
and proper hinge engagement.
Removing the Oven Bottom
The oven bottom can be removed for standard cleaning of the 
oven.
Before cleaning, make sure the oven is completely cool.
To Remove:
1. Remove the oven racks.
2. Place fingers in the slots in the bottom panel.
3. Lift the rear of the panel up and back.
The lip at the front of the panel should clear the front frame of 
the oven cavity.
4. Lift the bottom up and out.
To Replace:
Reverse the previous steps 1-4.
A. Hinge lock
A
A. Hinge lock
A. Lip
A
A