Whirlpool WED72HEDW Benutzeranleitung

Seite von 40
9
Cycle Guide – Manual Cycles
Settings and options shown in 
bold are default settings for that cycle.
If settings are changed, the new settings will be remembered (except on Quick Dry). If there is a power failure, settings will return to 
the default.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
Cycle Guide – Steam Cycle 
(steam models only)
Settings and options shown in 
bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Load Size Recommendations
For best results, follow the load size recommendations noted  
for each cycle. 
Small load: Fill the dryer drum with 3–4 items, not more 
than 1/4 full. 
Medium load: Fill the dryer drum up to about 1/2 full. 
Large load: Fill the dryer drum up to about 3/4 full.  
Do not pack tightly. Items need to tumble freely.
  On some models, you may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium 
Drying Temperature settings.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items 
such as towels and work clothes.
A Low to Medium heat setting may be used for drying  
medium-weight items such as sheets, blouses, dresses,  
underwear, permanent press fabrics, and some knits.
Use a no heat (air only) setting for foam, rubber, plastic,  
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for 
various loads, refer to the care label directions.
  You may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying 
Temperature settings.
 
 
Items to dry:
 
 
Cycle:
 
Drying  
Temperature:
 
Default 
Time:
 
Available 
Options:
 
 
Cycle Details:
Small loads and 
sportswear
Quick Dry
High
Medium
Low
Extra Low
Air Only
26
Wrinkle Shield
™†
For small loads of 3–4 items.
Any load
NOTE: Select Air 
Only to dry foam, 
rubber, plastic, 
or heat-sensitive 
fabrics.
Timed Dry
High
Medium
Low
Extra Low
Air Only
40
Wrinkle Shield
™†
Use to dry items to a damp level for items that do 
not require an entire drying cycle. Select a drying 
temperature based on the type of fabrics in your 
load. If you are unsure of the temperature to select 
for a load, select the lower setting rather than the 
higher setting.
 
Items to 
refresh:
 
 
Cycle:
 
Drying  
Temperature:
 
Default 
Time:
 
Available 
Options:
 
 
Cycle Details:
Shirts, blouses, and 
slacks
Steam 
Refresh
High
Medium
22
Wrinkle Shield
™†
Static Reduce
Use to reduce odors and light wrinkles.  
Do not add dryer sheets.
Adjusting drying time on Timed Cycles
When you select a Timed Cycle, the time  
appears in the display. Use + and – to increase 
or decrease the time in 1-minute increments. 
Touch and hold to change the time in 5-minute 
increments. 
The maximum dry time is 100 minutes.