Amana AGR5330BAB Installationsanweisungen

1. Locate gas pressure regulator in the back of the range.

IMPORTANT: Do not remove the gas pressure regulator.

2. Check that the gas pressure regulator shutoff valve is in the 

“ON” position.

IMPORTANT: The factory default setting is the “ON” position. If 
the range does not work, verify that the valve is in the “ON” 
position.

3. Open the manual shutoff valve in the gas supply line. The 

valve is open when the handle is parallel to the gas pipe.

4. Test all connections by brushing on an approved 

noncorrosive leak-detection solution. Bubbles will show a 
leak. Correct any leak found.

5. Remove cooktop burner caps and grates from parts 

package. Align notches in burner caps with pins in burner 
base. Burner caps should be level when properly positioned. 
If burner caps are not properly positioned, surface burners 
will not light. Place burners, burner caps and grates on the 
cooktop.

6. Plug into a grounded 3 prong outlet.

1. Place the outside of your foot against the bottom front of the 

broiler, and grasp the lower right or left side of the control 
panel as shown.

NOTE: If your countertop is mounted with a backsplash, it 
may be necessary to grasp the range higher than is shown in 
the illustration.

2. Slowly attempt to tilt the range forward. 

If you encounter immediate resistance, the range foot is 
engaged in the anti-tip bracket.

“

”

“

”

A

A

B