Vintage VBQ30GBN Handbuch
Page
6
BUILT-IN MODELS
Before locating your Vintage Grill into your Non-Combustible enclosure, complete the following steps:
1. Remove all packaging materials.
2. Ensure that the burners are positioned correctly on their orifices, and are fully seated onto their supports.
3. Position the Briquette trays onto their locating pins and place briquettes evenly across tray.
4. Ensure that NEW batteries are fitted and the igniter cap is properly installed. (See Fig. 1).
5. Make the connection to the gas regulator according to the instructions on pages 8 & 9 for your gas type.
6. To comply with safety and service requirements, main gas shut off valve must be accessible from front of
1. Remove all packaging materials.
2. Ensure that the burners are positioned correctly on their orifices, and are fully seated onto their supports.
3. Position the Briquette trays onto their locating pins and place briquettes evenly across tray.
4. Ensure that NEW batteries are fitted and the igniter cap is properly installed. (See Fig. 1).
5. Make the connection to the gas regulator according to the instructions on pages 8 & 9 for your gas type.
6. To comply with safety and service requirements, main gas shut off valve must be accessible from front of
grill without using any tools.
BUILT-IN INSTALLATION INSTRUCTIONS
Appliance Cut-Out Dimensions:
MODEL #
WIDTH
DEPTH
HEIGHT
VBQ-30BG&
VBQ-30G&
VBQ-30SZG
28 1/2”
23 1/16”
10 3/16”
VBQ-36G &
VBQ-36SZG
34 ½”
23 1/16”
10 3/16”
VBQ-42G &
VBQ-42SZG
40 1/2”
23 1/16”
10 3/16”
VBQ-56SZG
54 1/2”
23 1/16”
10 3/16”
Grill Assembly
IMPORTANT
Please verify by measuring actual appliance from box. **MEASURE TWICE, CUT ONCE**