Maytag MHW8100D Benutzeranleitung

Turn cycle knob to select your wash cycle. See “Cycle Guide” for 

details on cycle features. 

The display will show the default settings for the selected cycle.  

To adjust a setting, touch its name – Temperature, Soil Level, or 

Spin Speed. Adjusting settings will change the Estimated Cycle 

Time. Tightly packing the load, unbalanced loads, or excessive  

suds may also cause the washer to increase the cycle time. 

To add an option to the cycle, touch its name – Fresh Hold, Steam 

for Stains, Extra Rinse, Cycle Signal, or Control Lock. To remove  

an option from the selected cycle, touch the option again.

* Not all options and settings are available with all cycles. See “Cycle Guide” 

for available options and settings.

You can adjust the detergent concentration and water  

hardness settings if needed. Default settings are 2x detergent con-

centration and normal water hardness. If the detergent  

concentration is not listed on the package, see “About  

Detergent Concentration” to calculate the concentration.
To Adjust Dispenser Settings:
1.  Touch – or + until the desired concentration appears on the 

time display.

2.  Touch WATER HARDNESS until the desired water hardness 

appears on the time display.