Summit ARWL129NA_SUMMIT Gebrauchsanleitung

!

 This instruction manual should be kept in a safe place 

for future reference. If the washer is sold, transferred or
moved, make sure that the instruction manual remains with 
the machine so that the new owner is able to familiarise 
himself/herself with its operation and features.

!

Read these instructions carefully: they contain vital infor-

mation relating to the safe installation and operation of the 
appliance.

1. Remove the washer from its packaging.
2. Make sure that the washer has not been damaged
during the transportation process. If it has been damaged,
contact the retailer and do not proceed any further with the 
installation process.

3. Remove the 4 protective 
screws (used during tran-
sportation) and the rubber 
washer with the correspon-
ding spacer, located on the 
rear part of the appliance 
(see figure).

4. Close off the holes using the plastic plugs provided.
5. Keep all the parts in a safe place: you will need them
again if the washer needs to be moved to another location.

!

 Packaging materials should not be used as toys for 

children.

1. Install the washer on a flat sturdy floor, without resting it
up against walls, furniture cabinets or anything else.

2. If the floor is not perfectly
level, compensate for any 
unevenness by tightening 
or loosening the adjusta-
ble front feet (see figure); 
the angle of inclination, 
measured in relation to the 
worktop, must not exceed 
2°.

Levelling the machine correctly will provide it with stability, 
help to avoid vibrations and excessive noise and prevent it 
from shifting while it is operating.

This appliance may be installed in a recessed area, closet 
or alcove. The installation spacing is in inches and is the
minimum acceptable.

*Additional spacing should be considered for easy instal-
lation, servicing and compliance with local codes and 
ordinances. Installations must conform with the minimum
dimensions indicated.