Whirlpool WFG320M0BW Installationsanweisungen

1. Check that all parts are now installed. If there is an extra part, 

go back through the steps to see which step was skipped.

2. Check that you have all of your tools.

3. Dispose of/recycle all packaging materials.

4. Check that the range is level. See the “Level Range” section.

5. Use a mild solution of liquid household cleaner and warm 

water to remove waxy residue caused by shipping material. 
Dry thoroughly with a soft cloth. For more information, see 
the “Range Care” section of the Use and Care Guide or User 
Instructions.

6. Read the Use and Care Guide or User Instructions.

7. Turn on surface burners and oven. See the Use and Care 

Guide or User Instructions for specific instruction on range 
operation. 

■

Household fuse is intact and tight, or circuit breaker has not 
tripped.

■

Range is plugged into a grounded 3 prong outlet.

■

Gas pressure regulator shutoff valve is in the “on” position.

■

Electrical supply is connected.

■

See “Troubleshooting” in the Use and Care Guide or User 
Instructions.

8. When the range has been on for 5 minutes, check for heat. If 

the range is cold, turn off the range and check that the gas 
supply line shutoff valve is open.

■

If the gas supply line shutoff valve is closed, open it, then 
repeat the 5-minute test as outlined above.

■

If the gas supply line shutoff valve is open, press the 
CANCEL button on the oven control panel and contact a 
qualified technician.

Please reference the “Assistance or Service” section of the Use 
and Care Guide or the cover of the User Instructions, or contact 
the dealer from whom you purchased your range.

Gas conversions from Natural gas to LP gas or from LP gas to 
Natural gas must be done by a qualified installer.

1. Turn manual shutoff valve to the “closed” position.

2. Unplug range or disconnect power.

A

B

C