Whirlpool WFG505M0BS Benutzeranleitung

Use the following chart as a guide for cookware material 
characteristics.

When power is first supplied to the appliance, a flashing time will 
appear on the display. Press OFF/CANCEL to clear flashing time 
from the display. 

If flashing time appears, a power failure has occurred. Press 
OFF/CANCEL and reset the clock if needed.

When the oven is not in use, the display shows the time of day.

When performing a cook or timer function, the display will show 
either hours and minutes, or minutes and seconds.

The indicator lights are located on both sides of the display. The 
indicator lights light up or flash when the oven is in one of the 
following modes: Bake, Broil or Timer.

Start begins any oven function. If Start is not pressed within 
5 seconds after pressing a function pad, the Push to Start 
(“PSH”) indicator light will flash and the push to start tone will 
sound as a reminder.

If Start is not pressed within 1 minute after pressing a function 
pad, the oven display will return to the time of day mode and the 
programmed function will be canceled.

Off/Cancel stops any function except the Clock, Timer and 
Control Lock.

This is a 12-hour clock and does not show a.m. or p.m.

Before setting, make sure the oven and Timer are off. Press OFF/
CANCEL to cancel the oven, and press TIMER SET/OFF twice to 
cancel the timer.

1. Press CLOCK.

2. Press the TEMP/TIME “up” or “down” arrow pads to set the 

time of day.

3. Press CLOCK or START.

Tones are audible signals, indicating the following:

■

Valid pad press

■

Oven is preheated (long tone)

■

Function has been entered

■

Invalid pad press

■

Push to start reminder

■

End of cycle

■

Heats quickly and evenly.

■

Suitable for all types of cooking.

■

Medium or heavy thickness is best for 
most cooking tasks.

■

Heats slowly and evenly.

■

Good for browning and frying.

■

Maintains heat for slow cooking.

■

Follow manufacturer’s instructions.

■

Heats slowly, but unevenly.

■

Ideal results on low to medium heat 
settings.

■

Heats very quickly and evenly.

■

Follow manufacturer’s instructions.

■

Use on low heat settings.

■

See stainless steel or cast iron.

■

Heats quickly, but unevenly.

■

A core or base of aluminum or copper 
on stainless steel provides even 
heating.

.

A

B

C

D

F

G

I

H

J

K

L

E