Frigidaire FGEF3030PB Benutzeranleitung

SETTING OVEN CONTROLS

Setting the clock

When the appliance is first plugged in or when the power

supply to the appliance has been interrupted, the display

will flash "12:00". It is recommended to always set the

clock for the correct time of day before using the appliance.

NOTE

Changing temperature display (°F or °C)

The electronic oven control is set to display in °F

(Fahrenheit) when shipped from the factory. The oven can

be programmed for any temperature from 170°F to 550°F

(77°C to 287°C).

To change the temperature to display °C (Celsius) or

from °C to °F (control should not be set for Bake or

Self-clean when setting this feature):

1. Press

. "— —" appears in the display.

2. Press and hold the

until "HI" appears in the

display.

3. Press and hold

until °F or °C appears in the

display.

4. Press the

to change °F to °C or °C to °F.

5. Press any control pad to return to normal operating

mode.

Setting a silent control panel

When choosing a function, a beep will be heard each time a

pad is pressed. If desired, the control can be programmed

for silent operation. Press and hold

. After 7

seconds, the control will beep once. This will block the

controls from sounding when a pad is pressed. To return

the sound, press and hold

again for 7 seconds until

the control beeps once.

Changing between continuous bake

setting or 12-Hour Energy Saving feature

The oven control has a built-in 12-Hour Energy Saving

feature that will shut off the oven if the control is left on for

more than 11 hours and 59 minutes. The oven can be

programmed to override this feature for continuous baking.

Changing to continuous bake setting:

1. Press and hold

down for 5 seconds until a tone

sounds, " — — hr" will appear in display for continuous

cooking. The current time of day will return to the

display.

2. To cancel the continuous bake setting, press

and hold for 5 seconds until a tone sounds.

"12hr" will appear in display indicating that the control

has returned to the 12-Hour Energy Saving feature.

To set the clock:
1. Press

once (do not hold pad down).

2. Within 5 seconds, press and hold the

until

the correct time of day appears in the display.

The time of day cannot be changed when the oven or

self-clean is active.

NOTE

The temperature display feature cannot be changed

when the oven or self-clean is active.

Changing between continuous bake or the 12-Hour Energy

saving mode does not change how the cooktop controls

operate.

NOTE