Fagor 60CFP36X Installationsanleitung

 

9

 

1. 

Raise the hood into its mounting position.   

2. 

Align the rectangular opening on the back of the 
hood with the wall-mounting bracket. Gently lower 
the hood until it securely engages the bracket.   

3. 

Open the Al. filter and find the 

two Ø

8 mm holes on 

the back of the hood. Level the hood with 2 mounting 
screws (4*30mm) with washer. Use drywall anchors 
provided. 

 

4. 

Measure the height of the slide duct fixing support. 
Adjust the height of the chimney according to the 
height. Then use the duct fixing support with two 
screws (4x8mm) to fix the chimneys. Shown as in the 
pic. 

5. 

Put the chimney on the hood, use two screws (4x8mm)to 
fix the chimney to the duct fixing support. 

6. 

Use the other two screws (4x8mm) to fix the bottom of 
chimney. 

7. 

After adjusting the position, open the filter and fix the   
body inside with safety screws

（4X30MM）.  

4x8mm