Fisher & Paykel OR24SDMBGX2 Betriebsanweisung

Seite von 48
3
Dear Customer,
Thank you for having purchased and given your preference to our product.
The safety precautions and recommendations reported below are for your own safety and that of others. They 
will also provide a means by which to make full use of the features offered by your appliance.
Please preserve this booklet carefully. It may be useful in future, either to yourself or to others in the event that 
doubts should arise relating to its operation.
This appliance must be used only for the task it has explicitly been designed for, that is for cooking foodstuffs. 
Any other form of usage is to be considered as inappropriate and therefore dangerous.
The manufacturer declines all responsibility in the event of damage caused by improper, incorrect or illogical 
use of the appliance.
IMPORTANT - PLEASE READ AND FOLLOW
✓ 
Before beginning, please read these instructions completely and carefully.
✓ 
Do not remove permanently affixed labels, warnings, or plates from the product. This 
may void the warranty.
✓ 
Please observe all local and national codes and ordinances.
✓ 
Please ensure that this product is properly grounded.
✓ 
The electrical plug should always be accessible.
✓ 
The installer should leave these instructions with the consumer who should retain 
for local inspector's use and for future reference.
Installation must conform with local codes or in the absence of codes, the National Fuel 
Gas Code ANSIZ223.1 - Iatest edition. Electrical installation must be in accordance 
with the National Electrical Code, ANSI/NFPA70 - latest edition and/or local codes. IN 
CANADA: Installation must be in accordance with the current CAN/CGA-B149.1 National 
Gas Installation Code or CAN/CGA-B149.2, Propane Installation Code and/or local codes. 
Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical 
Codes Part 1 and/or local codes.
INSTALLATION IN MANUFACTURED (MOBILE) HOME: The installation must conform 
with the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 
[formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD 
(Part 280)] or, when such standard is not applicable, the Standard for Manufactured Home 
Installations, ANSI/NCSBCS A225.1, or with local codes where applicable.
INSTALLATION IN RECREATIONAL PARK TRAILERS: The installation must conform with 
state or other codes or, in the absence of such codes, with the Standard for Recreational 
Park Trailers, ANSI A119.5. 
Installation of any gas-fired equipment should be made by a Iicensed plumber. A manual 
gas shut-off valve must be installed in the gas supply line ahead of the appliance in the gas 
stream for safety and ease of service.
If an external electrical source is utilized, the appliance, when installed, must be electri-
cally grounded in accordance with local codes or, in the absence of local codes, with the 
national Electrical Code, ANSI/NFPA 70.
This range is supplied with a protective film on
 steel and aluminium parts.
This film must be removed before installing/using the appliance.
THIS RANGE IS FOR RESIDENTIAL USE ONLY