Whirlpool XHPC155Y Installationsanweisungen

1.  Unpack the washer/dryer and move close to the intended 

installation location.

1.   Unplug the power supply cord or disconnect wiring if dryer is 

direct wired.

2.   Pull the dryer away from the wall enough to loosen the vent 

clamp. Loosen the clamp and gently remove the exhaust vent 

from the dryer exhaust outlet.

 3.   Pull the dryer away from the wall so that you will have enough 

space for the installation. 

1.  Unplug the power supply cord.
2.  Turn off the gas supply.
3.   Pull the dryer away from the wall enough to loosen the vent 

clamp. Loosen the clamp and gently remove the exhaust vent 

from the dryer exhaust outlet.

4.   Disconnect the flexible gas supply line from the dryer. Put a 

piece of tape over the open ends of the gas line connection  

fittings.

5.   Pull the dryer away from the wall so that you will have enough 

space for the installation. 

Locate the transport bolts on rear of washer. Transport bolts 

must remain in washer before pedestal can be installed. For 

more information on transport bolts see, “Remove Transport 

System” in washer Use and Care Guide.