Avanti ER24P3SG Gebrauchsanleitung

Seite von 40
 
21 
 
 
 
 
 
  LIFT-UP COOKTOP 
You can access the area beneath of the cooktop for 
cleaning purposes by lifting up the cooktop. In order to 
do: 
•  Hold the cooktop from front left and right corners of 
cooktop and pull it up. 
•  After lifting up the cooktop high enough, set  the 
support rod into place as shown. 
•  Leave the cooktop on the tip of support rod. 
•  Wipe with warm soapy water. Use a soapy  steel- 
wool pad on heavily soiled areas. 
•  To lower the cooktop, lift the cooktop holding  from 
the front edge. Replace the support rod to  its 
previous place. Lower the cooktop in its  place. 
During replacement of the cooktop, be sure that  the 
front edge of cooktop covers the upper edge  of 
control panel. 
 
NOTE: Do not drop the cooktop. Personal injury or 
damage to the cooktop frame could result. 
 
 
  REMOVABLE STORAGE DRAWER 
 
① Lift the left small hook upward, at 
the same time, push the right small hook 
downward.(see the picture ) 
 
 
②Pull the drawer out. 
 
 
③To replace the drawer, align the 
drawer with the rails and push inward. 
 
 
 
 
 
 
Do not store flammable material in the oven or in the bottom drawer. 
 
 
  REPLACING THE OVEN LIGHT 
Before any maintenance is started involving electrical parts of the appliance, it must be  disconnected 
from the power supply. 
•  Let the oven cavity and broil burner cool down. 
•  Switch off the electric supply. 
•  Remove the protective cover. 
•  Unscrew  and  replace  the  bulb  with  a  new  one  suitable  for  high  temperature  (300°C  ~  570°C) 
having the same specifications: 240V 60Hz, 15W, E14. 
•  Replace the protective cover. 
 
NOTE: Oven bulb replacement is not covered by your guarantee.