Gaggenau VL414111 Installationsanweisungen
8
Special accessories
You can order the following special accessories from
your specialist dealer:
your specialist dealer:
Only use the accessories as specified. The
manufacturer accepts no liability if these accessories
are used incorrectly.
manufacturer accepts no liability if these accessories
are used incorrectly.
Installation accessories
Operation
Before using for the first time
Observe the following information before using the
appliance for the first time:
appliance for the first time:
Thoroughly clean the appliance and the accessories.
Switching on
Three ventilation settings and an intensive mode Ž
are available for extraction.
are available for extraction.
1
Open the locking mechanisms.
Note: To switch the fan on, at least one locking
mechanism must be open.
mechanism must be open.
2
Press in the control knob and turn the control
knob clockwise to the required fan function.
The illuminated ring behind the control knob
lights up.
knob clockwise to the required fan function.
The illuminated ring behind the control knob
lights up.
Intensive mode
The intensive mode runs for ten minutes. Once this
time has elapsed, the ventilation system switches back
to fan level 3. The illuminated ring behind the control
knob flashes for as long as the control knob is at the
intensive mode Ž position after intensive mode has
elapsed and at least 1 ventilation element is open.
The intensive mode runs for ten minutes. Once this
time has elapsed, the ventilation system switches back
to fan level 3. The illuminated ring behind the control
knob flashes for as long as the control knob is at the
intensive mode Ž position after intensive mode has
elapsed and at least 1 ventilation element is open.
Switching off
1
Turn the control knob to the 0 position.
2
Close the locking mechanisms.
AA 414 010
Ventilation moulding, for operating
beside a gas-fired appliance VG 414/
415/424/425
beside a gas-fired appliance VG 414/
415/424/425
VA 420 000
Connection strip for combination
with other Vario 400 appliances for
flush installation
with other Vario 400 appliances for
flush installation
VA 420 001
Connection strip for combination
with other Vario 400 appliances for
flush installation with appliance
cover/extension
with other Vario 400 appliances for
flush installation with appliance
cover/extension
VA 420 010
Connection strip for combination
with other Vario 400 appliances for
surface installation
with other Vario 400 appliances for
surface installation
VA 420 011
Connection strip for combination
with other Vario 400 appliances for
surface installation with appliance
cover/extension
with other Vario 400 appliances for
surface installation with appliance
cover/extension
VA 450 110
Filler strip, 11 cm, for depth
compensation for several Vario
appliances
compensation for several Vario
appliances
AD 724 040
Connecting piece for round pipe
NW 125 mm. Additional adapter AD
724 041 required for lateral
connection to VL 414.
NW 125 mm. Additional adapter AD
724 041 required for lateral
connection to VL 414.
AD 724 041
Connecting piece for round pipe
NW 125 mm. Required for lateral
connection to VL 414.
NW 125 mm. Required for lateral
connection to VL 414.
AD 854 046
Connecting piece for flat duct system
with guidance fins 1 x NW 150 mm,
flat
with guidance fins 1 x NW 150 mm,
flat
AS 070 000
Connecting pieces for lengthening
when installing beside VK or VF
when installing beside VK or VF