Fagor 2XINDUCTIONSET Benutzerhandbuch

If the cooktop detects an internal/external error or a wrong connection, it will display 
an error message with a code on the display panel and will stop functioning. These 
codes will allow you to identify the cause of the error and help you fi nd the solution 
to the problem. If the problem has been solved, the error message will disappear and 
you will be able to continue using your cooktop. If the error persists, please call our 
customer service for assistance. You can reach us at 1-800-207-0806.

E0:

Internal circuit error.

Self-help:

Call our customer service department for assistance.

E1:

There is no cookware on the ceramic plate or incompatible cookware 
is being used.

Self-help:

Place the cookware on the cooktop. Check if the cookware is 
compatible with a magnet.

E2:

Overheating protection on IGBT (Insulated-Gate Bipolar Transistor). 

Self-help:

The temperature of IGBT is higher than 180°F and this E2 error will 
appear in the display, the unit will shut itself off and turn its internal 
fan on. Please wait till the fan stops running, unplug the unit and then 
plug in again to restart.

E3:

Electronic control of excess voltage. 

Self-help:

Please make sure the appliance is connected to the voltage indicated 
on the rating label.

E4:

Electronic control of low voltage. 

Self-help:

Please make sure the appliance is connected to the voltage indicated 
on the rating label.

E5:

The sensor underneath the ceramic glass has opened or has short 
circuited.

Self-help:

Please call our customer service department for assistance.

E6:

The sensor of IGBT (Insulated-Gate Bipolar Transistor) has opened 
or has short circuited.

Self-help:

Please call our customer service department for assistance.