Frigidaire FGGF3058RW Benutzeranleitung

33

Routinely clean the cooktop. Wipe with a clean, damp cloth 

and wipe dry to avoid scratches. If a spill occurs on or in the 

recessed or contoured areas, blot up spill with an absorbent 

cloth. Rinse with a clean, damp cloth and wipe dry.

• Clean when the grates are cool.

• Use nonabrasive plastic scrubbing pad and mild abrasive 

cleanser.

• Food soils containing acids may affect the finish. Clean 

immediately after the grates are cool.

• Thoroughly dry grates immediately following cleaning.

• Remove caps from burner heads after they have cooled.

• Clean heavy soils with a plastic scrubbing pad and 

absorbent cloth.

• Thoroughly dry burner caps immediately following 

cleaning including the bottom and inside of cap.

• Do not use abrasive cleaners. They can scratch porcelain.

• Do not clean burner caps in the dishwasher.

• Check for correct burner cap placement after having 

removed and replaced the burner caps for cleaning.

To avoid possible burns DO NOT attempt the cleaning 

instructions provided below before turning OFF the 

surface burners and provide sufficient time for the 

cooktop and all cooktop parts to cool.

To prevent flare-ups and avoid creation of harmful

by-products, do not use the cooktop without all burner 

caps properly installed to insure proper ignition and gas 

flame size.

Always check for proper burner cap placement before 

operating any surface burner.

When placing burner caps, be sure that all burner caps 

are seated firmly and rest level on top of burner heads.

On round style burners, the burner cap lip should fit snug 

into the center of burner head and rest level (Fig. 1).

Fig. 1

Burner cap lip

Burner cap

Fig. 2

Correct

Burner head

Refer to Figs. 2  & 3 for correct and incorrect burner cap 

placement. Once in place, you may check the fit by gently 

sliding the burner cap from side to side (Fig. 4) to be sure 

it is centered and firmly seated. When the burner cap lip 

makes contact inside the center of the burner head you 

will be able to hear the burner cap click. Please note that 

the burner cap should NOT move off the center of the 

burner head when sliding from side to side. Check and be 

sure that all oval style (some models) burner caps are 

correctly in place on oval burner heads.

Fig. 3

Incorrect

Fig.4

Checking for proper burner cap placement (cont’d)

Any additions, changes or conversions required in order 

for this appliance to satisfactorily meet the application 

needs must be made by an authorized qualified Agency.