Whirlpool WEG730H0DS Installationsanleitung

Mobile Home - Additional Installation Requirements

The installation of this range must conform to the Manufactured
Home Construction and Safety Standard, Title 24 CFR, Part 3280
(formerly the Federal Standard for Mobile Home Construction
and Safety, Title 24, HUD Part 280). When such standard is not
applicable, use the Standard for Manufactured Home
Installations, ANSI A225.1/NFPA 501A or with local codes.

In Canada, the installation of this range must conform with the
current standards CAN/CSA-A240-latest edition, or with local
codes.

Mobile Home Installations Require:

■

When this range is installed in a mobile home, it must be
secured to the floor during transit. Any method of securing
the range is adequate as long as it conforms to the standards
listed above.

Product Dimensions

This manual covers several models. Your model may appear
different from the models depicted. Dimensions given are
maximum dimensions across all models.

Model KSGB900

IMPORTANT: Range must be level after installation. Follow the
instructions in the “Level Range” section. Using the cooktop as a
reference for leveling the range is not recommended.

*Range can be raised approximately 1" (2.5 cm) by adjusting the

leveling legs.

A. 1

³⁄₁₆

" (3.0 cm) height from cooktop

to top of vent

B. 29

⁷⁄₈

" (75.9 cm)

C. Model/serial/rating plate (located

behind the oven door on the top
right-hand side of the oven frame)

D. 36" (91.4 cm) height to top of

cooktop edge with leveling legs
screwed in all the way*

E. 28

⁵⁄₁₆

" (71.9 cm) max. depth

from front of console to
back of range

F. 28

⁷⁄₈

" (73.3 cm) max. depth

from handle to back of
range