Viking VQBO5322SS Installationsanweisungen

3

Illustration #3

Illustration #4

Install 4 Tinnerman clips (provided)
before fastening cabinets together

Mount cabinets
with #10 x 1/2”
screws provided

Use #8 x 3/8” machine screw and
locknut to fasten hole cover to
inside door panel

Use #8 x 3/8” flat
head M.S. and
locknut to attach
hinge bracket to
the inside door.

7.  Cabinet doors must be adjusted when cabinets are

level in final position. There are two adjustment
screws on the hinge receiver.  (See Illustration #5)

•The front screw is used to center the door in

the opening. Turning the front screws in or
out will center the door over the cabinet
opening.

•The back screw is used to align the front of

the door with the cabinet frame and secure
the door to the cabinet. Slightly loosen the
screw and slide door in or out. Retighten the
screw to secure the door.

 

Illustration #5

Front Screw

5.  Place cabinet(s) in approximate final position.

Level cabinets using leveling legs.  Use 1/2"
SMS screws provided to screw cabinets
together.  (See illustration #3).

6.  Determine appropriate hinge side for cabinets

with interchangeable doors.  Remove outside
door panel.  Install hinges by placing plate in
hole in door and fasten in place with hardware
provided.  Screw hinge plates in appropriate
pre-drilled holes in cabinet side. Fasten hole
covers with hardware provided.  (See
Illustration #4).

Back Screw