Hansgrohe 39835001 Installationsanweisungen
3
Installation
Place the faucet and sealing ring on the mounting surface.
If the mounting surface thickness is 1 3/8” or less, install the
plastic washer, friction washer, metal washer and mounting nut.
Tighten the mounting nut. Tighten the tensioning screws.
If the mounting surface is 1 3/8” - 3/8”, omit the plastic
washer.
Connect the handspray hose to the connection hose with the
compression nut, cone washer, brass washer and seal. Tighten
wrench tight. Do not allow the handspray hose or the supply
hose to twist.
Install the two hose weights on the handspray hose. Check
the action of the hose -- it should extend and retract smoothly.
Reposition the weights if necessary.
plastic washer
friction washer
metal washer
mounting nut
tensioning screws
sealing ring
compression nut
cone washer
brass washer
seal
friction washer
metal washer
mounting nut
tensioning screws
sealing ring