Broan QP336BL Benutzerhandbuch

When your hood fan is on (any speed) press the

button to

activate the delay off feature. When activated, the hood fan will
automatically turn off after 10-minutes has elapsed. The delay
feature is active when the following appear on the LED screen:
A green indicator illuminated above the delay

button, a nu-

meric countdown “10-0”, and a clockwise rotating LED. The delay
button can be pressed once again, to stop the delay countdown.
Pressing the

button again will resume the delay countdown.

Pressing and holding the button will turn off the feature.

Press the

button to activate the timer setting feature. Use

the   and

buttons to reduce or advance the timer setting to

the desired duration. When the desired timer setting is reached,
allow 3 seconds without pressing any additional button or press
the

 button  once  again. The  timer  will  then  activate,  and

the countdown will be displayed on the LED screen along with
an green indicator above the

button. After the timer has

reached  “0:00”,  an  audible  beep  will  be  heard.   The  beep  will
continue until the timer button

is pressed once again. The

timer  countdown  can  be  stopped  at  any  time  by  pressing  the

once again. Pressing the

button again will resume

the timer countdown. Pressing and holding the

button will

turn off the feature. Note that when both the timer and delay off
features are active together, the timer function will be illuminated
on the LED display, and the delay off countdown will be active,
but not displayed.

FEATURE MENU
Your hood offers many settings that can be accessed and ad-
justed  by  scrolling  through  the  feature  menu.   Your  hood  fan
must be off to be able to activate and access the feature menu.
Pressing the

button when the hood fan is off will activate the

feature menu. Pressing the

button again when the feature

menu is active will scroll through the various features that can
be adjusted/set. When the feature menu is active, if a button is
not pressed within 10 seconds or after scrolling through all menu
settings, the feature menu will automatically be exited, and all
selected settings will be saved. A green indicator above the
icon will illuminate when the feature menu is active. The follow-
ing features can be adjusted sequentially:

CLOCK SETTING
Press the

button once, the “hours” will begin blinking in the

LED screen. Use the   and

buttons to set the appropriate

hours  for  the  clock.   A  small  indicator  will  illuminate  in  the  left
corner of the LED screen to designate “pm”. After the hours are
set, press the

button to advance the menu to the minute se-

lection. The minutes will begin blinking in the LED screen. Use
the   and

buttons to set the minutes. Press the

button

again to advance the menu to select “display” settings.

DISPLAY (default from factory - display ON)
The LED screen will display the display feature -d-. Use the
or

button to toggle the LED screen on (d on) or off (doFF).

When the display off (doFF) feature is selected, the LED display
clock illumination is disabled. Press the

button again to ad-

vance the menu to select the “Sleep” setting.

SLEEP MODE (default from factory - OFF)
The LED screen will display the “Sleep” feature -S- . Use the
or

button to toggle the Sleep feature on (S on) or off (S off).

When the Sleep on (S on) feature is selected, the LED screen
and fan/light LED indicators are disabled. The ambient light sen-
sor, delay-off and timer features will also be disabled. All controls
for  the  fan  and  light  operation,  including  Heat  Sentry,  are  still
active. Press the

button again to advance the feature menu

to select the “Ambient Light Sensor” setting. Note: To access the
feature menu when the Sleep Mode is active, press and hold the

button for 2 seconds.

AMBIENT LIGHT SENSOR (default from factory - Level 1 ON)
There are two level settings for the ambient light sensor. When
either  of  the  two  settings  is  active,  the  light  sensor  will  detect
a  low  level  of  light  in  your  kitchen,  and  will  automatically  turn
the task lights on the hood to the night time setting. The other
light  settings  are  still  functional.  If  selected  when  the  ambient
light sensor is active, they will temporarily overide the ambient
light sensor until they are turned off. The level 1(Aon1) ambient
light sensor setting will require your kitchen to be more dark than
the level 2 (Aon2) setting before activating the night time setting.
The  LED  screen  will  display  the  ambient  light  sensor  function
-A-. Use the   or

button to select the light sensor setting

Aon1, Aon2,  or AoFF.   The  Off  (AoFF)  setting  deactivates  the
automatic  ambient  light  sensor  feature  so  the  night  time  light
operation is manual.

Note that the feature menu can be exited any time by not press-
ing any button(s) for 10 seconds or by scrolling through the entire
feature menu.