Whirlpool G7CE3635X Benutzeranleitung

■

Has a household fuse blown, or has a circuit breaker 
tripped?
Replace the fuse or reset the circuit breaker. If the problem 
continues, call an electrician.

■

Is the appliance wired properly?
See Installation Instructions.

■

Is the control knob set correctly?
Push in knob before turning to a setting.

■

Is the “All Off Lock” cooktop lockout set?
See “All Off Lock” section

■

Is the cooktop beeping continuously?
Wipe debris from the control panel surface.

■

Has one or more burners stopped working during use?
Allow the cooktop to cool down for 30 minutes then turn the 
burner on again.

■

Is the cookware the proper size?
Use cookware about the same size as the surface cooking 
area, element or surface burner. Cookware should not extend 
more than ½" (1.3 cm) outside the cooking area.

■

Do cooktop surfaces become hot?
REMEMBER: When cooktop is in use, the entire cooktop 
area may become hot.

■

All cooktop control panel lights flash on and off, indicating 
that one or more keys are permanently pressed. 

Follow the steps below.

1. Make sure the cooktop controls are OFF.
2. Clean the cooktop touch control panel thoroughly. See 

“General Cleaning” section. 

3. If the cooktop lights continue to flash, disconnect power 

or unplug the cooktop. 

4. After 1 minute, reconnect power or plug in the cooktop. 
5. If the lights continue to blink on and off, call for service.

■

Is the proper cookware being used?
See “Cookware” section.

■

Is the control knob set to the proper heat level?
See “Cooktop Controls” section.

■

Is the appliance level?
Level the appliance. See the Installation Instructions.

■

Does it appear to take longer to cook food at a certain 
power level than usual or some power levels do not 
perform as well as usual?
The cooktop regulates the temperature of the internal 
components and automatically reduces the power of all the 
elements in use without any visual or audible feedback. Allow 
the cooktop to cool down for 30 minutes to resume normal 
cooking performance. See “To Use” in the “Cooktop 
Controls” section.