Whirlpool G7CE3635X Benutzeranleitung

The electronic touch controls offer a variety of heat settings for 
optimal cooking results. When you are melting foods such as 
chocolate or butter, or when proofing bread, the surface cooking 
area can be set to Power Level 1 for minimal element operation.

For maximum element operation, all cooktop touch controls can 
be set to High when bringing liquids to a fast and rapid boil. 
Touch Power Level 10 to immediately reach the highest setting. 

1. Touch the ON keypad for the desired element. The Power 

Level 1 light will blink.

2. While the Power Level 1 light is blinking, touch the desired 

power level on the Power Level selector bar.

A beep will sound each time a pad is touched. The lights for 
the selected temperature setting and all lower temperatures 
will glow.

NOTE: If a power level setting is not selected within 
approximately 10 seconds, the element will automatically 
shut off.

3. To change the temperature setting while cooking, touch the 

ON keypad for the desired element and select a new Power 
Level temperature on the Power Level selector bar while the 
Power Level 1 light is blinking.

4. When finished cooking, touch OFF to turn off surface cooking 

area(s) individually or ALL OFF/LOCK to turn off all surface 
cooking areas at once.

Use the following chart as a guide when setting heat levels.

The Hot Surface Indicator Light is located in the central area of 
the control panel, above the Power Level selector bar. The Hot 
Surface Indicator Light will glow as long as any surface cooking 
area is too hot to touch, even after the surface cooking area(s) is 
turned off.

If the cooktop is on when a power failure occurs, the Hot Surface 
Indicator Light will remain on up to 45 minutes after the power is 
restored to the cooktop.

The cooktop regulates the temperature of the internal 
components during use. The cooktop automatically reduces the 
power of all the elements in use to keep the internal components 
from over-heating. To resume optimal cooking performance, 
allow the cooktop to cool down for 30 minutes.

The control panel has a Surface On indicator light. When any of 
the elements are on, the light will glow.
The power level 1 light next to an element will glow when that 
element is on.

A

■

Start food cooking.

■

Bring liquid to a boil.

■

Hold a rapid boil.

■

Quickly brown or sear food.

■

Maintain a slow boil.

■

Fry or sauté foods.

■

Cook soups, sauces and 
gravies.

■

Stew or steam food.

■

Provide lowest simmer/heat 
setting.

■

Simmer (range of simmer 
temperatures).

■

Melt chocolate and butter

■

Large-diameter cookware.

■

Large quantities of food.

■

Home canning.

REMEMBER: When cooktop is in use, the entire cooktop 
area may become hot.