Dacor DR30GFS Handbuch

17

When the oven is cool, put your fingers around the 

edges of the filter and gently push up.

Soak it in hot, soapy water. Rinse well. You may also 

place it in a dishwasher on the top rack. Dry the 

filter before re-installing it.

Carefully hook the metal clips on the back of the 

filter on the slots on both sides of the fan hole. Be 

careful not to scratch the porcelain surfaces with the 

back of the filter.

Replacing the Oven Light

•  To prevent an electrical shock hazard and/or personal 

injury, make sure that power to the range has been 

disconnected and that the light fixture is cool before 

replacing the light bulb.

•  Always ensure that the lens cover is in place when 

using the oven. The lens cover protects the bulb 

from breakage caused by high oven temperatures or 

mechanical shock.

•  Replacing the lens cover without lining up the cutout 

with the light socket will damage the light fixture.

•  Do not use a screwdriver to remove the lens.

Care and Cleaning

Light bulb replacement is considered a homeowner 

maintenance operation. If the light does not work, 

before replacing it, please consult the Problem 

Solution Guide on page 18.
1.  Replace the light bulb only with Dacor part 

number 107112. See page 20 for ordering 

information.  IMPORTANT: Do not touch the 

replacement halogen light bulb with your fingers. 

Halogen bulbs are sensitive to the oils from your 

hand. The oils from your hand will stick to the 

bulb and may cause it to burn out faster than 

normal.

2.  Disconnect the range power cord from the elec-

trical outlet.

3.  Hold your hand under the lens for support and 

gently pry it loose using a spatula or table knife. 

Pull the lens cover straight out.

4.  Grasp the old bulb and pull it straight out of the 

socket.

5.  Using a glove, insert the new bulb into the 

socket.

6.  As you reinstall the lens cover, line up the cutout 

on the inside rim with the light socket. Gently 

press it into its original position.

7.  Reconnect the power cord.

Light 

fixture

Light  

socket

Lens

Lens cutout

Bulb

1

2

3

4

5

7
6

Clips

Slots