Dacor DR30GIFSNG Installationsanweisungen

Seite von 20
11
Door Removal
Remove the door to make the range easier to move during 
the installation process.
 WARNING
•  Do not attempt to disengage the hinge catches with 
the door removed from the oven. The hinge springs 
could release causing personal injury.
•  Do not lift or carry the oven door by the door handle.
1.  Open the door to its fully opened position. 
2.  Use a flat blade screwdriver to rotate the catch over the 
retaining arm on both hinges.
3.  Lift the oven door to about a 15° angle from the vertical 
position.
4.  Hold the door with both hands just below the handle. 
Pull the door up and away from the oven. 
Door Gripping Points
Installation Instructions
Adjust the Range Height
1.  For stand alone configurations, raise the range until 
the top of the trim around the cooktop is at least 
the same height as the countertop. For self-rimming 
configurations, raise the range until the bottom of 
the trim surrounding the cooktop is even with the 
countertop. To adjust the height, turn the foot on the 
bottom of each leg as shown below.
2.  Use a level to make sure that the range does not tilt 
front to back or side to side. Re-adjust the legs as 
necessary. 
up
down
Retaining arm
Catch
NOTE: Handle 
style varies