Miele G6165SCVI Benutzeranleitung

Before using for the first time

19

Displaying and setting the water

hardness level
 Turn the dishwasher off with the 

button, if it is turned on.

 Press the program selection button



, and, simultaneously switch the

dishwasher on using the  button. 

Keep the program selection button 

pressed in for at least four seconds

until the lower right program indicator

light comes on.

If this does not happen, start the proce‐

dure from the beginning again.
 Press the  button twice.
The  indicator light will flash twice at

short intervals.

The value which has been set for the

water hardness appears as a figure in

the time display (see table) according to

.
  will start flashing in the time display.

This is the factory default setting of 1°.
 Use the program selection button 

to select the value which equates to

your water hardness level.

Each press of the button moves you

up a level. When the highest water

hardness level is reached, the setting

starts from the beginning again.

The setting is now stored in memory.
 Turn the dishwasher off with the 

button.