Perlick HP24FS35 Installationsanweisungen

PERLICK RESIDENTIAL INSTALLATION MANUAL

10

perlick.com

8). Remove the Perlick nameplate from the door front 

using a plastic putty knife (Fig. 12). Install the new Perlick 

nameplate included in the kit.

Nameplate

9). Insert the bearing into the door hinge bracket (Fig. 13).

10). Insert the V-block into the door bottom hinge bracket 

and attach with the e-clip (Fig. 13). Note the orientation of 

the V-block.

Bearing in

door top hinge

bracket

Door bottom bracket

V-block

6°

BOTTOM VIEW

Orientation

11). Attach the top and bottom hinges and push plunger 

using screws removed in step 6 (Fig. 14). 

Top hinge

and screws

Bottom hinge

and screws

Front panel

Corner screws need not be 

removed to remove front panel

7). Remove the front panel from the door assembly by 

removing the inner mounting screws, 4 per side, from the 

perimeter of the door assembly (Fig. 11). Rotate the front 

panel 180°. The top becomes the bottom. Reattach using 

the same screws and mounting holes.