Maytag MED7500YW Benutzeranleitung

3-wire receptacle (NEMA 

type 10-30R)

3-prong plug

Spade terminals with 

upturned ends

Ring terminals

Use where local codes permit connecting cabinet-ground 

conductor to neutral wire. 

D

B

B

Connect remaining wires under outer terminal block screws. 

Tighten screws. Finally, reinsert tab of terminal block cover  

into slot of dryer rear panel. Tighten strain relief nut. Now,  

go to “Venting Requirements.”

Connect the other wires to outer terminal block screws. 

Tighten screws. Replace the terminal block cover on the back 

of the dryer. Tighten strain relief nut. Now, go to “Venting 

Requirements.”

Connect neutral wire (white or center) (D) of power supply cord  

under center terminal block screw (B). Tighten screw.

Remove center terminal block screw (B).