Maytag MED7500YW Benutzeranleitung

Install exhaust hood and use caulking compound to seal  

exterior wall opening around exhaust hood.

Vent must fit over the exhaust hood. Secure vent to exhaust 

hood with 4" (102 mm) clamp. Run vent to dryer location using 

straightest path possible. Avoid 90° turns. Use clamps to seal 

all joints. Do not use duct tape, screws, or other fastening  

devices that extend into interior of vent to secure vent,  

because they can catch lint.

Using a 4" (102 mm) clamp, connect vent to exhaust outlet  

in dryer. If connecting to existing vent, make sure vent is 

clean. Dryer vent must fit over dryer exhaust outlet and inside 

exhaust hood. Check that vent is secured to exhaust hood 

with a 4" (102 mm) clamp.

Move dryer to final location, taking care not to crush or  

kink vent.
After dryer is in place, remove corner posts and cardboard 

from under dryer.