Broan QP436SS Installationsanleitung

When your hood fan is on (any speed) press the

button to

activate the delay off feature. When activated, the hood fan will
automatically  turn  off  after  10-minutes  has  elapsed. The  delay
feature is active when the following appear on the LED screen: A
green indicator illuminated above the delay

button, a numeric

countdown  “10-0”,  and  a  clockwise  rotating  LED.  The  delay
button can be pressed once again, to stop the delay countdown.
Pressing the

button again will resume the delay countdown.

Pressing and holding the button will turn off the feature.

Press the

button to activate the timer setting feature. Use

the   and

buttons to reduce or advance the timer setting to

the desired duration. When the desired timer setting is reached,
allow 3 seconds without pressing any additional button or press
the

 button  once  again. The  timer  will  then  activate,  and

the countdown will be displayed on the LED screen along with
an  green  indicator  above  the

 button. After  the  timer  has

reached  “0:00”,  an  audible  beep  will  be  heard.  The  beep  will
continue until the timer button

is pressed once again. The

timer  countdown  can  be  stopped  at  any  time  by  pressing  the

 once  again.  Pressing  the

 button  again  will  resume

the timer countdown. Pressing and holding the

button will

turn off the feature. Note that when both the timer and delay off
features are active together, the timer function will be illuminated
on the LED display, and the delay off countdown will be active,
but not displayed.

FEATURE MENU
Your  hood  offers  many  settings  that  can  be  accessed  and
adjusted  by  scrolling  through  the  feature  menu. Your  hood  fan
must be off to be able to activate and access the feature menu.
Pressing the

button when the hood fan is off will activate the

feature menu. Pressing the

button again when the feature

menu is active will scroll through the various features that can
be adjusted/set. When the feature menu is active, if a button is
not pressed within 10 seconds or after scrolling through all menu
settings, the feature menu will automatically be exited, and all
selected settings will be saved. A green indicator above the
icon will illuminate when the feature menu is active. The following
features can be adjusted sequentially:

CLOCK SETTING
Press the

button once, the “hours” will begin blinking in the

LED screen. Use the   and

buttons to set the appropriate

hours  for  the  clock. A  small  indicator  will  illuminate  in  the  left
corner of the LED screen to designate “pm”. After the hours are
set,  press  the

 button  to  advance  the  menu  to  the  minute

selection. The minutes will begin blinking in the LED screen. Use
the   and

buttons to set the minutes. Press the

button

again to advance the menu to select “display” settings.

DISPLAY (default from factory - display ON)
The LED screen will display the display feature -d-. Use the   or

button to toggle the LED screen on (d on) or off (doFF). When

the display off (doFF) feature is selected, the LED display clock
illumination is disabled. Press the

button again to advance

the menu to select the “Sleep” setting.

SLEEP MODE (default from factory - OFF)
The LED screen will display the “Sleep” feature -S-. Use the
or

button to toggle the Sleep feature on (S on) or off (S off).

When the Sleep on (S on) feature is selected, the LED screen
and  fan/light  LED  indicators  are  disabled.  The  ambient  light
sensor,  delay-off  and  timer  features  will  also  be  disabled.  All
controls for the fan and light operation, including Heat Sentry,
are still active. Press the

button again to advance the feature

menu  to  select  the  “Ambient  Light  Sensor”  setting.  Note:  To
access the feature menu when the Sleep Mode is active, press
and hold the

button for 2 seconds.

AMBIENT LIGHT SENSOR (default from factory - Level 1 ON)
There are two level settings for the ambient light sensor. When
either of the two settings is active, the light sensor will detect a low
level of light in your kitchen, and will automatically turn the task
lights on the hood to the night time setting. The other light settings
are  still  functional.  If  selected  when  the  ambient  light  sensor  is
active, they will temporarily overide the ambient light sensor until
they are turned off. The level 1(Aon1) ambient light sensor setting
will require your kitchen to be more dark than the level 2 (Aon2)
setting before activating the night time setting. The LED screen
will display the ambient light sensor function -A-. Use the   or
button to select the light sensor setting Aon1, Aon2, or AoFF. The
Off (AoFF) setting deactivates the automatic ambient light sensor
feature so the night time light operation is manual.

Note  that  the  feature  menu  can  be  exited  any  time  by  not
pressing any button(s) for 10 seconds or by scrolling through the
entire feature menu.