BlueStar BWO24AG Installationsanweisungen

                     P/N 750323 Page   24 

 

Before attempting to adjust the oven burner 
air shutter, insure the following has been 
checked and is correct: 



Proper gas type - match serial plate 



Proper regulator setting 



Orifice aligned - parallel with the ven-
turi to the burner 

After verifying the gas, regulator and ori-
fices adjust the air shutter by: 
1.  Remove bottom panel from inside oven 

cavity. 

2.  Remove lower kick panel held in place 

by two sheet metal screws 

3.  Pre-heat oven for 10-15 minutes.  DO 

NOT turn on convection oven fan dur-
ing adjustment procedure 

4.  Use a screwdriver to loosen the air shut-

ter tightening screw 

5.  Turn the air shutter as required to adjust 

the flame - open gap for “lazy” flame, 
close gap for “lifting” flame. 

6. Test burner. 
7.  If necessary, turn off burner and read-

just. 

8.  Turn off burner, tighten shutter screw 

and replace kick panel and oven bot-
tom. 

Your oven comes with either one or 
two oven lights.  When changing a 
burned out lamp it is necessary first to 
insure the oven is cool.  Grasp the clear 
globe lens and turn counter clock-wise 
to loosen.  Replace the burned out lamp 
with a 40 watt Appliance style bulb 
only.  Do not use normal lamp bulbs - 
they are not suited for the higher tem-
peratures of your oven.  Replace the 
clear globe.