GE JP328BKBB Benutzerhandbuch

Save these

instructions for local inspector’s use.

Observe all

governing codes and ordinances.

Be sure to leave these

instructions with the Consumer.

Keep these instructions

for future reference.

For personal safety, this

appliance must be properly grounded.See the
GROUNDING INSTRUCTIONS section in these
Installation Instructions.

• Proper installation is the responsibility of the installer. 

• Product failure due to improper installation is not

covered under the Warranty.

Before beginning the

installation, switch power off at the service panel and
lock the service disconnecting means to prevent
power from being switched on accidentally. When the
service disconnecting means cannot be locked,
securely fasten a prominent warning device, such as a
tag, to the service panel.

• To eliminate the risk of burns or fire by reaching over

heated surface elements, cabinet storage located
above the surface units should be avoided. If cabinet
storage space is to be provided, the risk can be
reduced by installing a range hood that projects
horizontally a minimum of 5

″ beyond the bottom of

the cabinets. Cabinet installation above the cooktop
may be no deeper than 13

″.

• The cooktop should be easy to reach and lighted with

natural light during the day.

• Electric or hand drill and 1/8

″ drill bit

• Flat blade screwdriver
• Phillips screwdriver
• Pencil
• Ruler
• Hand or saber saw
FOR TILE COUNTERTOP INSTALLATION
• Electric drill and 5/32

″ drill bit

• 4

3

⁄

16

″ x 1

1

⁄

4

″ masonry screws

Take cooktop from box and remove packing material:
• Paper under burner bowls
• Cardboard between cooktop and tub (must lift

cooktop)

• Tape holding support rod