Broan HLB3 Spezifikationenblatt

Seite von 1
SPECIFICATION SHEET
REFERENCE
QTY.
REMARKS
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
Broan-NuTone LLC, 926 West State Street, Hartford, Wisconsin 53027 (1-800-637-1453)
Broan-NuTone Canada, Inc., 1140 Tristar Drive, Mississauga, Ontario, L5T 1H9 (1-888-882-7626)
8” x 12”
DUCT
Powerful yet quiet blowers - exhaust the cooking
area from a remote location.
FEATURES
BLOWER:
Low RPM for quiet operation
Resilient anti-vibration mounts
Dynamically-balanced, galvanized steel, centrifugal
blower wheel for quiet, efficient performance
Permanently lubricated, thermally protected motor
Plug-in motor rated at 120 VAC
Designed for continuous operation
HOUSING:
Rugged galvanized steel
8-position mounting brackets for easy installation
and greater adaptability to various mounting
requirements
Automatic backdraft damper located within exhaust
duct connector
Factory-shipped in horizontal discharge position
May be converted to vertical discharge
Suitable for kitchen installations
ACCESSORIES INCLUDED:
8-inch x 12-inch integrated duct connectors
Two (2) 8-inch x 12-inch to 10-inch-round transitions
Hanger kit - for additional installation flexibility
TYPICAL SPECIFICATION
In-Line Blower shall be Model HLB9, (HLB11).
Unit shall have galvanized steel housing. Housing to
have adjustable mounting brackets.
Blower to include hanger kit, two (2) 8-inch x 12-inch to
10-inch-round transitions, and 8-inch x 12-inch integrated
duct connectors.
Automatic backdraft damper to be located within exhaust
duct connectors. Duct connectors, blower assembly
and wiring plate shall be adjustable for either horizontal
or vertical installation.
Blower unit shall be removable from housing and will
have a galvanized steel, centrifugal-type blower wheel.
Motor to be permanently lubricated and mounted with
resilient anti-vibration mounts.
Air delivery shall be no less than listed for each model.
All air ratings shall be certified by HVI. Units to be UL and
cUL listed.
50C
99043709B
* Performance ratings include the addition of a 10” round transition on
inlet and outlet.
SPECIFICATIONS
Model
Volts
Hz
Amps
CFM
Duct
Weight
HLB9
120
60
3.0
700 (V)
8” x 12” *
73.0 lbs.
800 (H)
HLB11
120
60
5.0
1000 (V)
8” x 12” *
73.1 lbs.
1100 (H)
IN-LINE BLOWERS
MODELS HLB9 & HLB11
For use with Broan Elite and NuTone Premier Hoods
.