Dacor ER30DSRSCHNGH Installationsanweisungen

Installation Instructions

Non-combustible

rear wall recommeded

Countertop Height: 35 5/8” (90.5 cm) min.,  37 3/8” (94.9 cm) max.  

Combustible side

wall above range

countertop opening

29 1/2” (74.9 cm)

30” (76.2 cm)

cabinet opening

below countertop

below countertop

Cabinet face

Notch countertop

overhang to width of

cabinets

1/4” min. (6 mm)

 Countertop

overhang

10” min.

(25.4 cm)

both sides

Countertop front

J K

rear wall recommended

Non-combustible

countertop opening

cabinet opening

below countertop

29 1/2” (74.9 cm)

27 1/2” (69.9 cm)

30” (76.2 cm)

2 3/8” (6.0 cm)

Combustible side

wall above range

10” min.

(25.4 cm)

both sides

Countertop Height: 35 5/8” (90.5 cm) min.,  37 1/4” (94.6 cm) max.

Notch countertop

overhang to width of

cabinets

3/8” min. (1.0 cm)

Countertop

overhang

below countertop

Cabinet face

downdraft vent opening

J K

Countertop front

Planning the Installation

• 

On installations without a downdraft vent (see above), when 

sliding the range into position, it will stop when the rear of 

the control panel contacts the notches toward the front of the 

countertop. The range trim will partially cover the overhang in 

back.

• 

On installations with a downdraft vent (see above right), 

install Dacor trim kit ATK30SR. When sliding the range 

into position, it will stop when the rear of the control panel 

contacts the notches toward the front of the countertop. The 

range trim will partially cover the front of the downdraft vent 

chassis in back.

without 

 downdraft vent

23 1/2” 

(59.7 cm)

24” to  

25 9/16”

with 

 downdraft vent

24” 

(61.0 cm)

24 1/2” to 

26 1/16”

• 

2 grates (PN 101524)

• 

1 small stack burner cap

1

• 

1 small stack burner ring

1

• 

2 large stack burner caps

2

• 

2 large stack burner rings

2

• 

1 crown burner cap

3

• 

1 crown burner ring

3

• 

1 crown burner head

3

• 

2 GlideRack™ oven racks 

(PN 72915)

• 

1 standard size rack 

(PN 62139)

Preparing for Installation

• 

If the gas or electric service provided does not meet the 

product specifications, do not proceed with the installation. 

Call the dealer, the gas supplier or a licensed electrician.

• 

Before installing the range, you must locate and secure the 

anti-tip bracket to the floor.

• 

Be sure that the unit is not connected to gas or power 

before proceeding with the following sections.

IMPORTANT: Within the Commonwealth of Massachusetts, this 

appliance must be installed by a licensed plumber or gas fitter.
NOTE: When installing a backguard, always install it before 

sliding the range into place.

Unpacking the Range

Unpack the range and verify that all required parts have been 

provided. If any item is missing or damaged, please contact 

your dealer immediately. Do not install a damaged or incomplete 

appliance. The customer must report cosmetic issues within 30 

days of installation.

• 

4 knobs  

Left (PN 100127-01) 

Right (PN 100127-02)

• 

Anti-tip bracket w/screws

• 

Meat probe (PN 72723)

• 

Griddle (PN 700570)

• 

Wok ring (PN AWR4)

• 

Stainless steel cleaner 

(PN A302)

• 

Literature kit

• 

Broiler pan/grill 

(PN 82107/82106)

See the use and care manual for a list of optional accessories.

1

 Small stack burner kit: PN 100699

2

 Large stack burner kit: PN 700493

3

 Crown burner kit: PN 100703

Cabinet Layout (cont.)