Dacor RNRP36G Benutzung Und Pflege

6

Cooktop Assembly

The burner rings spread the flame evenly around 

the burner cap. All burner parts must be properly 

seated for proper burner lighting and operation.

1.  Remove the burner rings, burner caps and grates 

from their shipping packages.

2.  Install the burners as shown below. Gently twist 

each piece back and forth after installation to 

make sure it is properly seated. A small gap 

below the burner ring is normal when installed 

properly.

3.  Gently set each grate on top of the spill tray. Put 

the legs of each grate inside the corresponding 

dimples.

Setting Up Your Range

(left front and right front burners only)

(left rear, right rear and both center burners)

STEP 1: Install burner 

head. Put locating tab 

in keyed hole.

STEP 2: Install burner 

ring. Line up ring tabs 

with head slots.

STEP 3: Install burner 

cap. Ridge on cap must 

surround top of ring.

Ridge on bottom 

of burner cap

Burner ring

Burner head

Burner base

Keyed hole

STEP 1: Put 

burner ring on top 

of head.

STEP 2: Turn ring 

until it drops into 

place.

STEP 3: Install 

burner caps. 

Ridge on cap must 

surround top of ring.

Burner ring

Burner head

Ridge on 

bottom of 

burner cap