Dacor ER36GISCHLPH Designanleitung
PLANNING
GUIDE
www.Dacor.com
Phone: (800) 793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
5.9
36” Wide, Epicure
®
Gas Range
ER36G, ER36GI
All tolerances +1/16” -0 (+1.6 mm, 0) unless otherwise noted.
nOTES:
• Utilities may be located in the lower
left corner of the adjacent right cabinet
(recommended). Consult local code.
• Self-rimming kit is included with model
ER36GI. The self-rimming kit allows the
trim to overlap the counter top on the sides
and back. ER36G is not equipped for self-
rimming installation.
a *
B
C
36 1/16” (916 mm)
30” (762 mm) Minimum
36” (914 mm) Recommended
37 7/8” (962 mm)
Maximum
Note 2
2
Cabinet/countertop depth is at discretion of customer
but cabinet face SHALL NOT protrude further than rear
of front panel. See product dimesions.
3
Consult local code for exact location requirements.
4
Not applicable for cabinets more than a horizontal
distance of 10” (254mm) from the edge of the range.
1
Vertical to combustible surface from range grate level
B
A
Non-combustible
surface along
back wall
recommended
10” (254mm Min.
to combustible side
walls above the range
(both sides)
Top of
finished
counter
Suggested
location of
utilities
3
30” (762mm)
Min.
1
13” (330mm)
Max.
4
18” (457mm)
Min.
1, 4
C
Cabinet Cutout Dimensions
Self-Rimming Cutout Dimensions -
Cabinet Depth Greater Than 24 Inches
(ER36GI only)
Self-Rimming Cutout Dimensions -
Cabinet Depth Exactly 24 Inches
(ER36GI only)
non comubustible
rear wall recommended
Countertop Height: Min: 35 1/2” (902 mm)
Max: 37 5/8” (956 mm)
Countertop Thickness: Max: 1 5/8” (41mm)
Countertop Thickness: Max: 1 5/8” (41mm)
countertop opening
35 1/4” (895 mm)
36” (914 mm)
cabinet opening
below countertop
below countertop
Cabinet face
Notch countertop
overhang to width of
cabinets
10” Min. (254mm)
to any combustibles
above counter both sides
Countertop overhang
2 1/8” (54 mm) Max.
24”
(610mm)
rear wall or
countertop edge
Countertop Thickness: Max: 1 5/8” (41mm)
countertop opening
cabinet opening
below countertop
below countertop
Cabinet face
Notch countertop
overhang to width of
cabinets
3/4” Min. (19mm)
Countertop overhang
10” Min. (254mm)
to any combustibles
above counter both sides
Countertop overhang
2 1/8” (54mm) Max.
24 1/8”
(613mm)
Countertop Height: Min: 35 1/2” (902 mm)
Max: 37 5/8” (956 mm)
35 1/4” (895 mm)
36” (914 mm)
* See the Cutout DimenSionS below for Self-rimming inStallationS
Document # PG05-002
Revised 05/07/09 Page 2/3