GE JGRP20 Benutzeranleitung

Using the clock and timer.

GEAppliances.com

Not all features are on all models.

The timer is a minute timer only.
The CLEAR/OFF pad does not affect

the timer.

To Set the Timer

The timer does not control oven operations. The

maximum setting on the timer is 9 hours and 59

minutes.

Touch the TIMER/CLOCK pad.
Touch the + or – pad until the amount of

time you want shows in the display. The

maximum time that can be entered in

minutes is 59. Times more than 59 minutes

should be changed to hours and minutes.

If you make a mistake, touch the TIMER/CLOCK

pad and begin again.

Touch the START pad. The time will start

counting down, although the display does

not change until one minute has passed.

When the timer reaches :00, the control

will beep 3 times followed by one beep

every 6 seconds until the TIMER/CLOCK

pad is touched.

To Set the Clock

The clock must be set to the correct time of day

for the automatic oven timing functions to work

properly. The time of day cannot be changed

during a delayed cooking or a delayed self-

cleaning cycle.

Touch the TIMER/CLOCK pad twice.
Touch the + or – pad.

If the + or – pad is not touched within one

minute after you touch the TIMER/CLOCK pad,

the display reverts to the original setting. If this

happens, touch the TIMER/CLOCK pad twice

and reenter the time of day.

Touch the START pad until the time of day

shows in the display. This enters the time

and starts the clock.

To check the time of day when the display is

showing other information, simply touch the

CLOCK pad. The time of day shows until another

pad is touched.

Make sure the clock is set to the

correct time of day.

To Turn Off the Clock Display

If you have several clocks in your kitchen, you

may wish to turn off the time of day clock

display on your oven.

Touch the TIMER/CLOCK pad once to

turn off the time of day display. Although

you will not be able to see it, the clock

maintains the correct time of day.

Touch the TIMER/CLOCK pad twice to

recall the clock display.

To Reset the Timer

If the display is still showing the time remaining,

you may change it by touching the TIMER/

CLOCK pad, then touching the + or – pad until

the time you want appears in the display.

If the remaining time is not in the display (clock,

start time or cooking time are in the display),

recall the remaining time by touching the

TIMER/CLOCK pad and then touching the + or

– pad to enter the new time you want.

To Cancel the Timer

Touch the TIMER/CLOCK pad twice.