Dacor OB52 Installationsanweisungen

Seite von 20

Connecting the Gas
Gas Connection - Natural Gas
 noTes
Units equipped for use with natural gas ship with a 
regulator assembly with 3/4” pipe attached and an 
additional 3/4” nipple.
The regulator assembly is also equipped with a 3/4” 
to 1/2” reducer on the inlet side. 
Connect the factory supplied regulator assembly to 
the gas inlet at the back right bottom corner of the 
appliance. Make sure the arrow on the regulator points 
in the direction of the gas flow (towards the grill).
Connect a 1/2” nipple to the regulator.
Install an approved flexible gas line from the regulator 
to the gas line shut off valve.
Gas Connection - Whole House LP Gas
Connect the factory supplied regulator assembly to 
the gas inlet at the back right bottom corner of the 
appliance. Make sure the arrow on the regulator points 
in the direction of the gas flow (towards the grill).
Connect a 1/2” nipple to the regulator.
1.
2.
3.
1.
2.
Installation Instructions
regulator assembly  
(included pN 700597Ng)
1/2” Nipple (not included)
flexible Gas line (not included)
natural Gas 
connection
whole house lP 
Gas connection
regulator assembly  
(included pN 700597lp)
1/2” Nipple (not included)
flexible Gas line (not included)
Install an approved flexible gas line from the regulator 
to the gas line shut off valve.
Gas Connection - LP Gas Cylinder Hose
Connect the supplied 3/4” coupling/nipple to the gas 
inlet at the back right bottom corner of the appliance.
Connect the included LP cylinder hose to the nipple.
3.
1.
2.
lP cylinder hose connection
3/4” coupling/Nipple 
(included) connect  
to outdoor Grill
lP regulator and hose  
assembly (included)
Pn 72310 for 
oBsB162, oB36, oBs36
Pn 101578 for 
oB52, oBs52