Houzer EPO3370SR Installationsanweisungen
1. Prepare the Sink Base Cabinet
Farmhouse sinks require custom order sink base cabinets with a front cutout to accommodate a 10" deep sink.
Build a plywood platform on a support frame inside of the sink base cabinet. Platform must support the weight
of the sink and any attachments such as garbage disposals. When the sink is placed onto a platform, make sure
the top of the sink is evenly flush against the bottom of the countertop. Allow clearance for water supply line
and drains or garbage disposal, as necessary.
Build a plywood platform on a support frame inside of the sink base cabinet. Platform must support the weight
of the sink and any attachments such as garbage disposals. When the sink is placed onto a platform, make sure
the top of the sink is evenly flush against the bottom of the countertop. Allow clearance for water supply line
and drains or garbage disposal, as necessary.
2. Make a Template and Cutout
3. Set the Sink
Set the sink on top of the cabinet or
into the cabinet front cutout.
Apply sealant if necessary as a gasket
between the sink and cabinet.
into the cabinet front cutout.
Apply sealant if necessary as a gasket
between the sink and cabinet.
4. Install the Countertop
Depending on the installation option, make
proper cutout of the countertop.
Houzer recommends a 1/4" reveal on 3 sides
when installed undermount style.
For a flush mount or built up installation,
cut countertop along with outside line of
the sink profile.
Front end of Epicure Farmhouse sinks are
designed to be installed 3/4” extended out
beyond the front end of the countertop.
Cut countertop accordingly.
No template is provided due to the
custom nature of each application and
installation.
The actual sink is used as the template guide
for each installation.
After centering the sink and allowing for
any faucets and backsplashes, use a pencil
to outline the sink as your guide for the cutout,
allowing for any reveal before the
actual cutting.
proper cutout of the countertop.
Houzer recommends a 1/4" reveal on 3 sides
when installed undermount style.
For a flush mount or built up installation,
cut countertop along with outside line of
the sink profile.
Front end of Epicure Farmhouse sinks are
designed to be installed 3/4” extended out
beyond the front end of the countertop.
Cut countertop accordingly.
No template is provided due to the
custom nature of each application and
installation.
The actual sink is used as the template guide
for each installation.
After centering the sink and allowing for
any faucets and backsplashes, use a pencil
to outline the sink as your guide for the cutout,
allowing for any reveal before the
actual cutting.
Carefully clean bottom of countertop and top flange of sink with denatured alcohol. Apply bead of silicone
adhesive (not supplied) around the top edge of the sink. Place countertop onto the sink. Remove excess sealant
from the lip or any surfaces with a cleaner recommended by manufacturer of adhesive sealant.
adhesive (not supplied) around the top edge of the sink. Place countertop onto the sink. Remove excess sealant
from the lip or any surfaces with a cleaner recommended by manufacturer of adhesive sealant.
3