Manualsbrain.com
  1. Handbücher
  2. Marken
  3. GE
  4. JGRP20SENSS
  5. Benutzeranleitung

GE JGRP20SENSS Benutzeranleitung

Download
Seite von 28
Fahrenheit or Centigrade Temperature Selection
Your oven control is set to use the Fahrenheit 
temperature selections but you may change this  
to use the Centigrade selections.
   Touch the BAKE and BROIL HI/LO pads 
at the same time for 2 seconds until the 
display shows SF.
   Touch the BROIL HI/LO and COOKING 
TIME pads at the same time for 2 seconds. 
The display will show F (Fahrenheit).
   Touch the BROIL HI/LO and COOKING 
TIME pads again at the same time 
for 2 seconds. The display will show C 
(Centigrade).
   Touch the START pad.
Changing the Speed of the +/– Pads
As you use the +/– pads when setting a time 
or temperature, you may notice the display 
changes slowly. This special feature allows you 
to change the speed. 
To set the speed you prefer, follow the steps 
below:
   Touch the BAKE and BROIL HI/LO pads 
at the same time for 2 seconds until the 
display shows SF.
   Touch the + pad. The display will show you 
a set speed between 1 and 5.
   Touch the + pad to increase the speed up 
to the number 5.
   Touch the – pad to decrease the speed 
down to the number 1.
   Touch the START pad to activate the 
setting and leave the control set in this 
special features mode.
12-Hour, 24-Hour or Clock Black-Out
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour military 
time clock or black-out the clock display, follow 
the steps below:
   Touch the BAKE and BROIL HI/LO pads 
at the same time for 2 seconds until the 
display shows SF.
   Touch the TIMER/CLOCK pad once. The 
display will show 12 hr.
   Touch the TIMER/CLOCK pad again to 
change to the 24-hour military time clock. 
The display will show 24 hr.
   Touch the TIMER/CLOCK pad again to 
black-out the clock display. The display will 
show OFF.
   Touch the START pad to activate your 
choice and leave the control set in this 
special features mode. 
NOTE: If the clock is in the black-out mode you 
will not be able to use the Delay Start function.
 
GEAppliances.com
Control Lockout
Your control will allow you to lock out the 
touch pads so they cannot be activated when 
touched.
To lock the controls:
   Touch the BAKE and BROIL HI/LO pads 
at the same time for 2 seconds until the 
display shows SF.
   Touch the SELF CLEAN pad. The display 
will show LOC OFF.
Touch the SELF CLEAN pad again. The 
display will show LOC.
   Touch the START pad to activate the 
control lockout feature and leave the 
control set in this special features mode.
When this feature is on and the touch pads 
are touched the control will beep and the 
display will show LOC.
NOTE: The control lockout mode will not affect 
the clock, timer and oven light touch pads.
9