Gaggenau AL400721 Broschüre
84
Vario cooktops
C X 480 111
Stainless steel frame
Width 80 cm
Width 80 cm
Installation accessories
V A 420 010
V A 420 010
Connection strip for combination with
other Vario appliances of the 400
series for surface installation
other Vario appliances of the 400
series for surface installation
V A 420 011
Connection strip for combination with
other Vario appliances of the 400
series for surface installation with
appliance cover/adjustment strip
other Vario appliances of the 400
series for surface installation with
appliance cover/adjustment strip
V A 420 000
Connection strip for combination with
other Vario appliances of the 400
series for flush installation
other Vario appliances of the 400
series for flush installation
V A 420 001
Connection strip for combination with
other Vario appliances of the 400
series for flush installation with
appliance cover/adjustment strip
other Vario appliances of the 400
series for flush installation with
appliance cover/adjustment strip
V A 450 800
Stainless steel adjustment strip 80 cm
Required accessory for combination of
several Vario appliances of the 400
series with at least one appliance cover
to compensate the appliance depth.
Required accessory for combination of
several Vario appliances of the 400
series with at least one appliance cover
to compensate the appliance depth.
Special accessories
G N 232 110
G N 232 110
Teppan Yaki made of multi ply material,
GN 1/1
For full surface induction hob CX 480.
GN 1/1
For full surface induction hob CX 480.
G N 232 230
Teppan Yaki made of multi ply material,
GN 2/3
For full surface induction hob CX 480.
GN 2/3
For full surface induction hob CX 480.
Full surface induction cooktop
C X 480
– One single big cooking surface
– Free positioning of cookware
– All sizes and formats of cookware
can be used
– TFT touch display for an intuitive
control of all functions
– Max. power output for big cookware
of up to 4.4 kW
– Precision crafting of 3 mm stainless
steel
– For surface installation with a
visible edge or for flush installation
– Can be combined perfectly with
other Vario appliances of the 400
series
series
Cooking zones
One unique cooking surface of
2,800 cm².
Up to 4 items of cookware can be
placed simultaneously on the cooktop.
2,800 cm².
Up to 4 items of cookware can be
placed simultaneously on the cooktop.
Handling
Easy to use colour graphic TFT touch
display with use indications.
Electronic power control in 17 output
levels.
display with use indications.
Electronic power control in 17 output
levels.
Features
Booster function.
Individual pot detection.
Cooking timer for each cooking
position.
Timer.
Information key with use indications.
Power management.
Individual pot detection.
Cooking timer for each cooking
position.
Timer.
Information key with use indications.
Power management.
Safety
Main switch.
Residual heat indicator.
Child lock.
Display cleaning protection.
Residual heat indicator.
Child lock.
Display cleaning protection.
Planning notes
Depending on the type of installation
(surface-mounted or flush-mounted),
the specific definition of the cut-out
must be observed.
If installing with the appliance cover
VA 440 or adjustement strip VA 450
take into account the additional space
required for the depth.
If combining several appliances with at
least one appliance cover, the
adjustment strip VA 450 is required to
compensate for the depth of the
appliance without the appliance cover.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type of
installation, the corresponding
connection strip must be provided.
In the cut-out, the installation system
requires the side edge to be at least
10 mm for surface installation and at
least 13 mm for flush installation.
Ensure a continuous cut surface of
90°.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush installa-
tion:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must be
observed. Concerning other materials
please consult the worktop manu-
facturer.
(surface-mounted or flush-mounted),
the specific definition of the cut-out
must be observed.
If installing with the appliance cover
VA 440 or adjustement strip VA 450
take into account the additional space
required for the depth.
If combining several appliances with at
least one appliance cover, the
adjustment strip VA 450 is required to
compensate for the depth of the
appliance without the appliance cover.
If combining several Vario appliances
of the 400 series, a connection strip
VA 420 must be placed between the
appliances. Depending on the type of
installation, the corresponding
connection strip must be provided.
In the cut-out, the installation system
requires the side edge to be at least
10 mm for surface installation and at
least 13 mm for flush installation.
Ensure a continuous cut surface of
90°.
The bearing capacity and stability, in
the case of thin worktops in particular,
must be supported using suitable
substructures. Take into account the
appliance weight and additional loads.
Additional instructions for flush installa-
tion:
Installation is possible in worktops
made of stone, synthetics or solid
wood. Heat resistance and watertight
sealing of the cut edges must be
observed. Concerning other materials
please consult the worktop manu-
facturer.
The groove must be continuous and
even, so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
even, so that uniform placing of the
appliance on the gasket is ensured.
Do not use discontinuous lining.
The joint width may vary due to size
tolerances of the combinations and of
the worktop cut-out.
Please read additional planning notes
on page 116–123 .
on page 116–123 .
If installing several appliances in
individual cut-outs allow for a division
bar of minimum 50 mm between the
individual cut-outs.
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of sandwich
bottom cookware is recommended.
The wok pan WP 400 001 cannot be
used with this appliance.
Immersion depth depending on
installation situation 64/67 mm.
Intermediate shelf is required.
Appliance can be snapped into the
worktop from above.
Appliance weight: approx. 27 kg.
Please read additional planning notes
on page 178 .
individual cut-outs allow for a division
bar of minimum 50 mm between the
individual cut-outs.
Operates with magnetic (induction)
iron pots and pans only. For an optimal
heat distribution, the use of sandwich
bottom cookware is recommended.
The wok pan WP 400 001 cannot be
used with this appliance.
Immersion depth depending on
installation situation 64/67 mm.
Intermediate shelf is required.
Appliance can be snapped into the
worktop from above.
Appliance weight: approx. 27 kg.
Please read additional planning notes
on page 178 .
Connection
Total connected load 7.2 kW.
Connecting cable 1.5 m without plug.
Connecting cable 1.5 m without plug.