Dacor RNRP30GCNGH Installationsanweisungen

STEP 1   Disconnect the range power supply at the 

circuit breaker or fuse box. Turn the gas 

OFF at the gas supply valve.

STEP 2   Remove the range grates.
STEP 3   Remove and discard the screws from the 

rear of the backguard. 

STEP 4  Position and hold the kit against the rear of 

the backguard.

STEP 5  Thread the new screws through the kit and 

into the backguard. Screw them firmly into 

place.          

STEP 6  Finish installing the downdraft and slide  

the range into position.

STEP 7  Re-engage the range within the anti-tip 

bracket. 

STEP 8  Connect the power to the circuit breaker   

or fuse box.

STEP 9  Turn the gas supply valve ON.              

•  Make sure the downdraft is in place before sliding the range into position.

•  Confirm that the range’s anti-tip bracket is re-engaged when the final project is complete.

Part No. 109308 Rev.   A

WARNING: Do not maneuver or handle the range unless it is cool.

RNRP30G Range 

Shown