Perlick HP24TS32R2A Installationsanweisungen
3
perlick.com
PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
INSTALLATION OF DISPENSING EQUIPMENT
Open the tapping kit box and become familiar with its
components. The instructions on pages 4 through 10
will demonstrate how to properly install the tapping
equipment on your new Perlick Beer Dispenser.
Dispensing Head
Faucet Lead
Apply silicone to
bottom flange
bottom flange
Air Distributor
Flange Sleeve
All hose connections
use worm-drive
hose clamps (view
enlarged to verify)
use worm-drive
hose clamps (view
enlarged to verify)
Distributor is only on
multiple keg units,
each keg is connected
to a valve on the air
distributor. Single keg
is connected directly to
the regulator.
multiple keg units,
each keg is connected
to a valve on the air
distributor. Single keg
is connected directly to
the regulator.
Keg
Keg Coupler
Beer Connection
NOTE: Image does not accurately reflect positions of the
different elements within the unit. Positions and hose lengths
shown are to clearly illustrate proper connection methods
only.