Amana ART318FFDW Benutzeranleitung

1. Remove the three dome caps and screws from the handle 

side and use them to fill the holes created when the hinge 
screws were removed. 

2. Using the three 

⁵⁄₁₆" hex-head hinge screws, removed in 

Step 1, insert two screws halfway into the holes, leaving 
space to insert the center hinge.

3. Once the refrigerator door is in place, slide the center hinge 

from the right onto the screws, insert the third screw, and then 
tighten all screws completely.
NOTE: Make sure the washers are in place on both the top 
and bottom pins of the center hinge. 

1. Remove the three cabinet hole plugs from the top of the 

cabinet and place them in the hinge holes on the opposite 
side.

2. Remove the door stop from the bottom of the freezer door. 

3. Move the door stop to the opposite side, making sure that the 

hole in the door stop plate is aligned perfectly with the hole for 
the center hinge pin.

4. Using the screw removed in Step 2, fasten the door stop to 

the bottom of the freezer door. 

5. Set aside the freezer door until the hinges and refrigerator 

door are in place.

1. Remove the door stop from the bottom of the refrigerator 

door. 

2. Replace the door stop on the opposite side of the refrigerator 

door, making sure that the hole in the door stop plate is 
aligned perfectly with the hole for the bottom hinge pin. 

3. Fasten the door stop to the door.
4. Remove door hinge hole plug from freezer door. Move to 

opposite side. 

5. Set aside refrigerator door until bottom hinge is installed on 

the opposite side of the refrigerator.

⁵⁄₁₆

A

B

C

A

A

B

A

A

B

A

A

B