Whirlpool WED8700EC Benutzerhandbuch
15
4.
Select type of load to dry
First select a cycle from the “What to Dry” (Automatic cycles) and
then select the “How to Dry” to get the best combination cycle
available for the type of items you are going to dry. See “Cycle
Guide” for cycle details. Not all cycles are available on all models.
Automatic Cycles:
Automatic Cycles:
You can select a different dryness level, depending on your
load. Touch DRYNESS to scroll to Less to More. Selecting
Less to More automatically adjusts the dryness level at which
the dryer will shut off. Dryness level can be changed in the first
5-8 minutes of the cycle.
Automatic Cycles give the best drying in the shortest time. Drying
Automatic Cycles give the best drying in the shortest time. Drying
time varies based on fabric type, load size, and dryness setting.
NOTE: Automatic Cycles will give you up to 3 temperatures to
NOTE: Automatic Cycles will give you up to 3 temperatures to
adjust and it varies, depending on the “What to Dry” or “How
to Dry” selections that have been made.
TIMED DRY Cycle:
When you select Timed Dry, the default time appears in the
display. Touch “+” and “–” to increase or decrease the time in
1 minute increments. Touch and hold to change the time in 5
minute increments.
The default temperature may be changed by pressing
The default temperature may be changed by pressing
Temperature until the desired dry temperature is lit.
Steam Refresh Cycles:
Steam Refresh Cycles:
If you will be unable to remove a load immediately, touch
FINISHING TOUCH twice to select Wrinkle Shield™, to add
up to 150 minutes of periodic tumbling.
7.
Touch and hold START/PAUSE
to begin cycle
Touch and hold START/PAUSE to begin the cycle.
8.
Remove garments promptly
after cycle is finished
Promptly remove garments after cycle has completed
to reduce wrinkling.
5.
Adjust cycle modifiers, if desired
You may adjust different settings,
depending on what you are drying and
how you are going to dry the item. See the
“Cycle Guide” for detailed information.
NOTE: Not all options and modifiers are
NOTE: Not all options and modifiers are
available with all cycles.
6.
Select any additional options
Add additional options such as Static Reduce, Wrinkle
Shield™, and/or EcoBoost™ by touching that option. If you
will be unable to remove the load promptly, select Wrinkle
Shield™ before touching START/PAUSE.
NOTE: Not all options and settings are available with all cycles.
NOTE: Not all options and settings are available with all cycles.
u
q
u
q
Changing the Automatic Cycle settings
to increase or decrease drying time
If all your loads on all Automatic Cycles are consistently less
dry or more dry than you would like, you may change the
default settings to increase or decrease the default dryness
level.
Your automatic drying settings can be adjusted to adapt to
Your automatic drying settings can be adjusted to adapt to
different installations, environmental conditions, or personal
preference. This change is retained and will affect all of your
Automatic Cycles, not just the current cycle/load. There are
5 drying settings, which are displayed using the time display:
0 Much wetter clothes, 30% less drying time.
1 Slightly wetter clothes, 15% less drying time.
2 Factory preset dryness level.
3 Slightly drier clothes, 15% more drying time.
4 Much drier clothes, 30% more drying time.
To change the drying settings:
NOTE: The settings cannot be changed while the dryer
is running or paused. The dryer must be in standby mode
(power is off) to adjust the default settings.
1. Before starting a cycle, touch and hold DRYNESS
for 6 seconds.
2. Touch DRYNESS to select the dryness level shown in
the time display: 0, 1, 2, 3, or 4.
3. Touch and hold START/PAUSE to save the new dryness
level setting.